Study plan

How to study for the CDL permit test

The permit is a few separate knowledge tests, each needing 80%. Studying them as one big pile is the slow way. This is the order that works.

Updated:

In short

Work out which tests your license needs, study from your state's CDL manual one section at a time, practice each test separately, and book it when you score well above 80% on practice tests you have not seen before.

1. Work out which tests you need

  • General Knowledge: everyone.
  • Combination Vehicles: for Class A.
  • Air Brakes: if your vehicle has air brakes; without it you get a restriction.
  • Endorsements: only the ones you need (see the endorsements list).

Federal rule 383.135(a)(2)-(3) for air brakes and Class A; 383.93 for endorsements.

2. Use your state's manual as the source

The tests come from the FMCSA-approved question pool (383.133(b)(1)), and the state CDL manual is written to match it. Read the section of the test you are about to take, not the whole book.

3. Practice one test at a time

Do sets by topic, then a full practice test with the right number of questions. Look at why you missed each one: a wrong answer you understand is worth more than three right ones by luck.

4. When you are ready

Our advice 80% is the minimum, so aim higher on practice. If you score 90% or more on two full practice tests in a row with questions you had not seen, the real test is unlikely to surprise you. This is our rule of thumb, not an official one.

5. If you study in Spanish

Check now whether your state gives the test in Spanish; Florida and Texas no longer do. The state-by-state guide.

Sources

  • Federal rule 49 CFR Part 383 (Commercial Driver's License Standards), eCFR text saved on August 24, 2026: §383.93 endorsements, §383.133 test methods, §383.135 passing scores, §383.153 license codes.